江蘇溫控器廠家,江蘇溫控開關廠家,浙江溫控器廠家

圖片所示產品的機種碼是：T24-CF1-CP（支架：C；殼體材質：C），完整的料號需錄入客戶需求的溫度。它的尺寸圖如下圖所示：

The model code of the product shown in the picture is T24-CF1-CP(Bracket:C;Case material:C).the complete part number needs to be entered into the temperature required by the customer.The following picture is its size drawing.

最通用的KSD301溫控開關/溫控器

The most versatile KSD301 thermostats.

溫度范圍廣，從低溫到高溫，可根據客戶需求設定動作及復位溫度值。

A wide range of temperature,low temperature till high temperature,can be set according to customer requirements.

帽蓋/殼體材質，支架樣式/端子角度/端子尺寸均可根據客戶需求定制。詳情參見底部表格。

Cap/Case material,Bracket type/Terminal Orientation/Terminal Size could be customized based on actual demand. See the bottom for details.

類型：?jiǎn)蔚秵螖S

Type: Single pole - single throw

T24系列溫控開關高度：12.4毫米（T23系列是9.6毫米）

T24 series thermoistat Height: 12.4mm(T23 series is 9.6mm)

動作溫度設定值范圍

Operating temp:

UL/CUL: 0℃～250℃

TUV: 0℃～220℃

CQC: 50℃～250℃

復位區間：8℃或者更多（取決于客戶需求）

Differential: 8℃ or more（depend on customer's demand.）

帽蓋/支架材質：鋁/不銹鋼/銅

Cap/Bracket Material: Aluminum/Stainless steel/Copper

端子角度：0°/30°/45°/60°/90°

Terminal Orientation:0°/30°/45°/60°/90°

端子尺寸：4.75毫米(0.187英寸)/6.35mm(0.25英寸)

Terminal Size：4.75mm(0.187inch)/6.35mm(0.25inch)

殼體材質：電木（T）/塑料（P）/陶瓷（C）

Case Material: Phenolic(T)/PPS(P)/Ceramic(C)

電氣額定值

Electrical Rating:

16A/250V AC Resistive load

15A/125V AC Resistive load

10A/250V AC Resistive load

溫度公差：±3℃或者以上，標準：±3℃～±12℃（取決于客戶需求的動作溫度值）

Temp Tolerance: ±3℃ or more, Standard: ±3℃～±12℃(depend on customer required operating Temp)

壽命：10萬次以上

Endurance: 100,000 cycles or more

內部阻抗：50mΩ以下

Circuit Resistance: 50mΩ or less

絕緣電阻：100MΩ以上（直流500V電壓下測試）

Insulation Resistance: 100MΩ or more(DC 500V)

耐電壓：在上蓋與導電端子之間施加1450V交流電一分鐘不被擊穿（漏電流0.5mA）

Dielectric Strength: AC 1,450V for 1 min.

通用的支架/端子樣式和殼體材質有如下表可選擇。我們也樂意與客戶開發新的設計。

Current bracket/Terminal types and case material options are as below. We would like to cooperate customer for new design.